Whether it is manufacturing or construction, as a business owner, your primary goal is to complete each project on time and without any safety incidents. Probably the best way to avoid any untoward incident is to use the most suitable lifting or rigging equipment.
As lifting is one of the most complicated and risky operations, you need to be extra careful when selecting a hoist. A suitable hoist ensures increased safety and timely work completion. It also provides longer product life and lowers the chances of costly unplanned repairs. In other words, investing time and money in finding a suitable hoist pays for itself in the long run.
Let’s explore the factors you need to consider when choosing a hoist for your project.
The first step is to select a hoist befitting your needs. There are four main types of hoists, and each one comes with its own set of pros and cons.
Manual hoists are the simplest and cheapest option available. They are also compact and lightweight, which means you can move or transport them easily. But, operating a manual hoist is quite laborious. You will need to pull the chain every time you use the hoist. So, it’s best to use this type of hoist occasionally.
Manual hoists typically have lower rated capacities than powered hoists and are best suited to smaller loads, shorter lifts, and infrequent use — checking the specific model's rated capacity and lift height is part of choosing the right hoist. In short, these hoists are best suited for smaller loads, shorter lifting heights, and infrequent use.
A type of powered hoist, electric hoists are silent, durable, cost-effective, and have high load-carrying capacity. Most electric hoists come with adjustable speed and an emergency brake. The adjustable speed will vary from model to model. But, the basic variants usually have only slow and fast speed options.
You can use these hoists for lifting applications that require precision. However, electric hoists are not designed for continuous operation. Prolonged use can overheat the electric motor, causing it to burn.
They are quite similar to electric hoists. But, instead of electricity, pneumatic hoists use compressed air as the power source. These hoists are suitable for continuous operation (more lifting cycles) and long lifts.
Pneumatic hoists come with varying speeds and are much faster than electric hoists. They are also quiet, durable, and provide high-precision lifting. But, the biggest advantage of pneumatic hoists is that you can use them in highly explosive areas. There is no risk of short circuit and consequent fire hazard as no electric current is involved.
However, you will need to clean the air filters regularly. Although they are dust and moisture-resistant, most pneumatic hoists may malfunction without regular maintenance.
Hydraulic hoists need a suitable hydraulic power supply. They are best suited for lifting operations in extreme conditions, including areas with a high risk of explosion. They also have very high lifting power, allowing you to lift heavy loads with ease and precision. They run quietly and are durable. The only con is, they can be quite expensive.
Rated capacity is another critical factor that you can’t ignore. Each hoist comes with a rated capacity. You will need to make sure that the load doesn’t exceed the rated capacity. Overloading not only leads to accidents but also reduces hoist life.
Apart from the hoist, you will also need to check the rated capacity of the support structure used to rig up the hoist. Usually, you can use an I-beam, gantry crane, or overhead crane to support the hoist. Make sure this structure is strong enough to support the load you want to lift.
In addition to the rated capacity, you also need to consider lift height. It is the maximum distance from the floor to the hook when the hoist is in the resting position. When it comes to lift height, you will need to consider the distance between the hook when it is raised and lowered.
You also need to think about the headroom, which is the distance between the hook when it’s raised and the hoist suspension. Finally, check the distance between the hoist suspension and the hook when it’s at the lowermost level.
The next factor you need to consider is the type of hoist suspension. Most manufacturers offer the following three hoist suspension options.
The hoist body comes with a hook, which you can attach to the crane or I-beam to suspend the hoist. You can get a rigid or a swivel hook system. The rigid hook system is better for applications where you need to keep your load stable. On the other hand, the swivel hook system is more suitable for applications that require rotational movement.
Sometimes, the hoist frame comes with a lug mounting. You can connect a lug-mounted hoist to a trolley, I-beam, or any other support structure. You will need to use suitable pins or studs to fasten the lug to the hoist securely.
You can find hoists with an integral trolley. However, you can also connect a hook, clevis, or lug-mounted hoist to a trolley using suitable pins or studs.
Trolleys allow traverse motion on:
The three main types of trolley suspensions include plain trolleys, hand chain operated trolleys, and electrically or pneumatically powered trolleys. You can choose a trolley suspension based on your budget and requirements.
Lifting speed is also a critical factor. In this case, the two important parameters you need to consider include:
As you can see, a manual hoist will take a considerably longer time to lift and move the load. If you want to lift heavy loads quickly and over a long distance, you are better off using a powered hoist.
Moreover, higher speed is suitable where you have to complete more lifting cycles but require no precision. In other words, if you need high-precision lifting, go for a hoist with a lower speed.
Choosing the right power supply is also essential, especially when using electrical hoists. You will come across single or three-phase power supply options for electric hoists. Single-phase hoists are suitable for carrying lighter loads, while three-phase hoists can lift heavier weights. Most manufacturing and construction projects need three-phase electric hoists as the loads are often heavy. However, do check with experts how much power you need for safe hoisting.
Hoist selection commonly considers OSHA and ASME B30 series requirements. However, you should also consider the following safety features, commonly found in almost all types of hoists.
These switches warn you when operating a hoist is not safe. For example, some hoists have an upper limit switch, which blocks the load from running into the rigging. Similarly, a limit switch also warns you when the hoist reaches the bottom or top of the track.
The purpose of an over-speed brake is to prevent the hoist from free-falling. It is essential to conduct a drop test periodically to ensure the over-speed brake is working. This is a critical safety measure.
The over-load sensor prevents the hoist (electric variant) from burning out. Your hoist can burn out in the following situations.
Finally, you also need to consider your budget. Manual hoists will be the cheapest available option. However, given their limited use, you will need to consider investing in a powered hoist, which will cost you a pretty penny. Plus, the cost will vary depending on the make and model, rated capacity, and other features.
However, you will have plenty of options. As this is going to be a substantial investment, you should consider long-term benefits. Invest in a hoist that will cater to your present as well as future lifting requirements.
It should also be durable and require lower maintenance. In short, do as much research as you can. Reach out to more than one dealer and compare the costs and products before making the final decision. If you have budget constraints, you can also try renting a suitable hoisting assembly.
Lifting heavy loads is perhaps the riskiest and most challenging step involved in most projects. But with the right type of hoists, it doesn’t have to be. Selecting a suitable hoist ensures efficiency as well as safety. Be sure to keep these eight tips in mind when looking for a hoist you need.
If you are looking for hoists or any other lifting or rigging equipment, HHI Lifting can help. We sell and rent different rigging hardware at reasonable rates. Call us today to find a suitable rigging product or service.
Shop Online Chain HoistsThe main categories are manual hoists (hand chain and lever), electric hoists (chain, wire rope, and belt), pneumatic hoists (piston, chain, and wire rope), and hydraulic hoists. Each category fits different environments, duty cycles, and load ranges. Manual hoists work without a power source; pneumatic hoists run on compressed air and are suited to hazardous environments; electric hoists are common in fixed production applications. Browse Hoists At Holloway Houston.
Capacity selection starts with the actual load weight plus the weight of any rigging hardware - hooks, slings, shackles - attached below the hook. The hoist's rated Working Load Limit must meet or exceed that combined weight. Lift height, headroom, and duty cycle are additional factors that affect model selection. Published WLL tables and manufacturer documentation identify the rated configuration for each product. Holloway Houston rigging specialists can verify the match for a specific application - call 1-888-496-4700.
Headroom is the minimum distance required between the hoist's suspension point and the load hook when the chain or rope is fully retracted. If the available headroom in a facility is shorter than the hoist's minimum headroom specification, the load cannot be lifted to the intended height. Lever hoists typically need less headroom than hand chain hoists of comparable capacity, which is one reason they are common in confined or low-clearance spaces.
Duty cycle describes how long a hoist can operate before requiring rest or cooling, typically expressed as a ratio of operating time to total cycle time. Exceeding the duty cycle accelerates wear and creates overheating risk in electric models. Manufacturer documentation specifies the duty classification for each product. ASME B30.16 addresses overhead hoist performance criteria including duty classifications for chain hoists.
Inspection programs for overhead hoists typically look for deformation of hooks or structural components, cracked or elongated hook throats, inoperable load brakes or limit devices, damaged or stretched load chain, illegible capacity markings, and any condition that prevents the hoist from operating as designed. Product-specific removal criteria follow the applicable manufacturer documentation and ASME B30.16 / B30.21 inspection guidance. Holloway Houston offers inspection services for hoist equipment.
The content provided is for general informational purposes only and is not a substitute for professional advice. Holloway Houston, Inc. is not responsible for any actions taken based on this information.