Chair Type Wire Rope Clips

Chair Type Wire Rope Clips

Chair-type wire rope clips are designed to form loop ends and temporary wire rope terminations without swaging. With a flat, chair-style saddle and dual bolt design, these clips offer a secure and even grip along the rope's surface. This construction helps maintain the wire rope’s shape by spreading clamping pressure evenly, reducing the risk of crushing the outer strands. Our sizes range from 3/16" to 1-3/8", suitable for static and light rigging applications across many job types.

These clips are widely used in fencing, guy wire assemblies, support cables, and bracing systems. The saddle’s shape aligns with the rope contour to limit movement, while the two bolts offer easy adjustment and retightening on-site. Chair-type clips are a go-to for non-permanent connections where components may need to be repositioned or replaced over time. Sizes like 3/8", 3/4", and 1" are often selected for typical field applications, while larger sizes such as 1-1/8", 1-1/4", and 1-3/8" are preferred in heavier static systems.

In most assemblies, these clips are used along with thimbles to help maintain the shape of the rope loop and reduce internal stress. A thimble inside the loop protects the rope from bending sharply or wearing against hardware, making it a common companion product. In general, three clips complete one loop end, appropriately spaced to balance the grip along the rope’s lay direction.

Chair type clips are recommended only for static systems—not for lifting or critical overhead applications. Their design supports light-duty holding strength where movement is minimal and loading is consistent. For jobs involving dynamic or high-load conditions, drop forged wire rope clips are better suited due to their forged saddle and higher resistance under tension.

If a more permanent end termination is required, swage sockets or spelter sockets can be used as alternatives. These fittings create fixed connections and are typically chosen for heavy-duty rigging, lifting, or marine use. However, chair-type clips remain a practical choice for cost-effective and straightforward terminations where reusability and field adjustability matter.

Installation is straightforward—position the saddle on the live end of the rope and tighten the bolts evenly. After initial loading, it’s important to retighten the bolts to maintain grip. Regular checks are recommended to verify the holding strength, especially in high-vibration environments. Inspect for corrosion in outdoor or wet environments and consider using clips with coatings or plating as needed.

Chair-type clips are compatible with common wire rope types such as galvanized or bright wire. They are often found in agricultural fencing, sign installations, temporary guy lines, and indoor suspension systems. When paired with turnbuckles, they can help adjust tension easily, especially in bracing applications. You can also use them alongside eye bolts and wire rope thimbles to complete the termination assembly.

At Holloway Houston, we carry a wide selection of chair type wire rope clips with matching specifications for each rope size. Whether you need 5/16", 7/8", or 1-1/4" rope clips, our listings include the right fit. Each product listing offers bolt sizes, saddle dimensions, and usage guidance to help you choose the correct match. Our clips are ready to ship for your fencing, support, or rigging jobs.

These clips also work well for signage systems, cable railing, or temporary event structures. Their low-profile saddle is easy to install in tight spots or indoor systems without special tools. If needed, clips can be removed and reused, making them convenient for shifting layouts or short-term builds.

When assembling your rigging kit, consider pairing chair-type clips with galvanized wire rope, turnbuckles, or load-rated shackles for complete systems. Always follow proper installation procedures and refer to the manufacturer's spacing guidelines for increased safety. Browse our selection online to find the correct size and quantity for your rope setups.