Lightweight Handling
HHIPPO Link soft shackles weigh significantly less than comparable steel fittings, helping reduce operator fatigue during repetitive rigging tasks.
HIPPO Links
| Part Number | Size | Length | Work Load Limit lbs | Weight in lbs |
|---|---|---|---|---|
| EHL-316-006 | 3/16 | 6" | 2,700 | 1.056 |
| EHL-014-006 | 1/4" | 6" | 4,000 | 1.088 |
| EHL-516-010 | 5/16" | 10" | 5,800 | 1.187 |
| EHL-038-010 | 3/8" | 10" | 8,700 | 1.296 |
| EHL-716-010 | 7/16" | 10" | 9,400 | 1.35 |
| EHL-012-010 | 1/2" | 10" | 12,500 | 1.608 |
| EHL-916-010 | 9/16" | 10" | 15,160 | 1.790 |
| EHL-058-018 | 5/8" | 18" | 20,500 | 2.484 |
| EHL-034-018 | 3/4" | 18" | 27,400 | 2.862 |
| EHL-078-024 | 7/8" | 24" | 37,000 | 4.528 |
| EHL-001-024 | 1" | 24" | 44,000 | 5.212 |
| EHL-118-024 | 1-1/8" | 24" | 58,800 | 7.380 |
| EHL-114-024 | 1-1/4" | 24" | 66,000 | 8.240 |
| EHL-112-028 | 1-1/2" | 28" | 88,400 | 15.476 |
| Part Number | Size | Length | Work Load Limit Pounds | Weight in Lbs |
|---|---|---|---|---|
| EHL-316-006 | 3/16" | 6" | 2,700 | 1.06 |
| EHL-014-006 | 1/4" | 6" | 4,000 | 1.09 |
| EHL-516-010 | 5/16" | 10" | 5,800 | 1.19 |
| EHL-038-010 | 3/8" | 10" | 8,700 | 1.3 |
| EHL-716-010 | 7/16" | 10" | 9,400 | 1.36 |
| EHL-012-010 | 1/2" | 10" | 12,500 | 1.61 |
| EHL-916-010 | 9/16" | 10" | 15,160 | 1.79 |
| EHL-058-018 | 5/8" | 18" | 20,500 | 2.48 |
| EHL-034-018 | 3/4" | 18" | 27,400 | 2.66 |
| EHL-078-024 | 7/8" | 24" | 37,000 | 4.53 |
| EHL-001-024 | 1" | 24" | 44,000 | 5.21 |
| EHL-118-024 | 1-1/8" | 24" | 58,800 | 7.38 |
| EHL-114-024 | 1-1/4" | 24" | 66,000 | 8.24 |
| EHL-112-028 | 1-1/2" | 28" | 88,400 | 15.48 |
HHIPPO Link HMPE Soft Shackles for Industrial Rigging
HHIPPO Link soft shackles are used as HMPE rigging connectors by teams that require consistent strength, traceability, and controlled manufacturing. Available in diameters from 1/4" to 1-1/2", with working load limits ranging from 4,000 lb up to 88,400 lb, these soft shackles support a wide range of industrial lifting activities, including crane lifting, heavy equipment moves, and engineered synthetic assemblies.
Manufactured from high-modulus polyethylene (HMPE) fibers, HHIPPO Link soft shackles do not corrode, spark, or damage contact surfaces. The flexible construction allows them to conform to rounded or irregular anchor points while maintaining effective load transfer. This makes them suitable for use alongside synthetic slings, lifting assemblies, and non-metal connection points where steel hardware may introduce unnecessary weight or surface contact concerns.
Key Benefits of HHIPPO Link Soft Shackles
HHIPPO Link soft shackles provide functional advantages that support their use in industrial rigging systems:
Lightweight design
Reduces handling effort during rigging and repetitive lifts.
Non-metal construction
Prevents corrosion, sparking, and surface damage.
Surface protection
Helps avoid marking painted, coated, or finished equipment.
Flexible connection geometry
Adapts to rounded or irregular anchor points.
Reduced hand injury risk
No sharp edges or rigid metal components.
Floatable HMPE fibers
Useful in marine, offshore, and water-adjacent work.
Low conductivity
Supports use where metal hardware is restricted.
These characteristics make HHIPPO Link soft shackles a practical option for teams using synthetic rigging systems in industrial, marine, and controlled lifting environments.
HHIPPO Link Product Range
HHIPPO Link soft shackles are manufactured exclusively by Holloway Houston and designed specifically for industrial lifting environments that require controlled quality and repeatable performance. Production focuses on consistency across materials, splicing methods, and final assembly.
HHIPPO Link Soft Shackles
Designed for crane operations, equipment handling, and engineered synthetic systems, HHIPPO Link soft shackles are produced in-house using verified HMPE fibers and established splicing techniques. Diameters range from 1/4" to 1-1/2", with working load limits reaching up to 88,400 lb, supporting a broad range of lifting requirements across industrial applications.
HHIPPO Link Soft Shackle Capacity Reference
The table below provides a general reference showing how diameter typically aligns with working load limits for HHIPPO Link soft shackles.
| Diameter (inches) | Typical WLL Range | Product Line |
|---|---|---|
| 1/4" | ~4,000 lb | HHIPPO Link™ |
| 5/16" | ~5,400–6,300 lb | HHIPPO Link™ |
| 3/8" | ~7,000–8,700 lb | HHIPPO Link™ |
| 7/16" | ~9,400 lb | HHIPPO Link™ |
| 1/2" | ~12,000–14,000 lb | HHIPPO Link™ |
| 5/8"–3/4" | ~19,000–32,000 lb | HHIPPO Link™ |
| 1"–1-1/2" | Up to 88,400 lb | HHIPPO Link™ |
Note : Always refer to the individual product page and documentation for the applicable working load limit.
| Diameter (inches) | Typical WLL Range | Product Line |
|---|---|---|
| 3/16" | ~2,700 lb | HHIPPO Link™ |
| 1/4" | ~4,000 lb | Imported |
| 5/16" | ~5,400–6,300 lb | HHIPPO Link™ |
| 3/8"" | ~7,000–8,800 lb | HHIPPO Link™ / Imported |
| 7/16" | ~9,400 lb | Imported |
| 1/2" | ~12,000–14,000 lb | HHIPPO Link™ |
| 5/8"–3/4” | ~19,000–32,000 lb | HHIPPO Link™ |
| 1"–1-1/2" | Up to 88,400 lb | HHIPPO Link™ |
How HHIPPO Link Soft Shackles Are Manufactured and What They Provide ?
HHIPPO Link soft shackles use HMPE fibers combined with a knot-and-loop closure to form a strong yet flexible synthetic connector. This construction supports efficient load transfer while keeping the shackle lightweight and adaptable across different rigging configurations. The absence of rigid metal components allows the shackle body to conform naturally to contact surfaces under load.
Core Material
- High-modulus polyethylene (HMPE).
- Non-corrosive and non-marring.
- Floats in water (specific gravity ~0.97).
- Continuous service temperature range from −40°F to 158°F.
Functional Features
- Stopper knot serves as the primary load-bearing element.
- Adjustable loop tightens under applied load.
- Flexible body adapts to contact angles and surface geometry.
- Available in multiple diameters, lengths, and color options.
These characteristics make HHIPPO Link soft shackles a practical option for teams using synthetic rigging systems in industrial, marine, and controlled lifting environments.
Design & Materials of HHIPPO Link Soft Shackles
HHIPPO Link soft shackles perform best when paired with rigging components designed for synthetic connections. Proper selection of contact surfaces and adherence to diameter guidelines support effective load transfer and help maintain service life..
Connection Points
- Pins should be at least 3× the rope diameter.
- Sheaves or rounded surfaces should be at least 8× the rope diameter .
- Sharp edges, burrs, or abrasive contact areas should be avoided
Environmental Awareness
- Temperature : −40°F to 158°F.
- Extended UV exposure can affect long-term performance.
- Chemical exposure may influence fiber behavior depending on substance.
- Coating selection influences abrasion resistance.
Why Are HHIPPO Link Soft Shackles Used in Synthetic Rigging ?
Flexible connection points
The knot-and-loop closure adapts to rounded anchors, lift points, and structural attachments.
Non-corrosive and floatable
HMPE fibers resist corrosion and float in water, supporting use in marine, offshore, and water-adjacent environments.
Reduced surface impact
Synthetic construction helps prevent damage to painted, coated, or finished equipment.
HHIPPO Link soft shackles are manufactured by Holloway Houston using verified HMPE fibers and established synthetic splicing techniques. Production processes focus on consistency and repeatable performance. Soft shackles are an emerging connector category, with the Cordage Institute’s CI 1702 standard currently in final review to establish a formal reference.
In-House Manufacturing
HHIPPO Link soft shackles are produced within Holloway Houston facilities to maintain control over materials and assembly processes.
Precision Splicing Methods
Each shackle is hand-spliced using recognized synthetic rigging techniques to support uniform load transfer.
Standards Alignment
Product design references OSHA 1910.184 terminology, with soft shackle standards currently under development by the Cordage Institute.
Industrial Application Focus
Manufactured for crane lifts, equipment handling, and non-metal connection points in synthetic rigging systems.
Inspection & Care
Before each use, inspect the soft shackle for :
- Exposed or cut fibers.
- Diameter reduction greater than 10%.
- Heat glazing or stiffness.
- Chemical discoloration or brittleness.
- UV-related surface degradation.
After exposure to saltwater, sand, or contaminants, rinse thoroughly and allow the shackle to dry before storage.
Store away from prolonged sunlight. Inspection guidance aligns with OSHA 1910.184 terminology and WSTDA synthetic inspection practices.
Usage Guidelines for HHIPPO Link Soft Shackles
General Application Guidance
- Confirm the working load limit listed on the product page.
- Inspect the shackle body, knot, and loop before use.
- Avoid routing over sharp or high-friction surfaces.
- Maintain proper D/d ratios (3× pins, 8× sheaves).
- Keep synthetic components clean after use.
Environmental Notes
HMPE fibers operate within −40°F and 158°F.
UV exposure affects long-term strength
Chemical compatibility varies by substance.
SAFETY NOTES
Always inspect prior to use. Do not exceed working load limits. Use only for approved applications. If any doubt exists regarding condition or use, discontinue immediately and consult the manufacturer.
Recommended Holloway Houston Products
Soft shackles fit naturally into synthetic lifting assemblies and towing setups, especially when paired with compatible slings and hardware. Many teams use them alongside synthetic web slings, round slings, and other non-metallic lifting tools to reduce weight and improve handling during repetitive work.
Imported soft shackles
Lightweight, high-strength connectors for efficient lifting.
Holloway brings you the HHIppo Link Soft Shackles – a new, improved version of the traditional soft shackles. It is made from a high-modulus polyethylene rope, which lends it exceptional strength and durability.
This single-strand soft shackle comes with a stopper at one end (a knot) and a round slice (a noose) at the other. Manufactured through our unique braiding machine, it has an additional braided polyester jacket coated with Fiber Lock as abrasion protection. This feature improves the Hippo LinkTM’s lifespan and durability.
Notable Features:
It is extremely light-weight, making it easy to carry or transport.- It can float in water, and hence, ideal for rigging applications in the deep sea or on ships.
- It boasts a low stretch, which increases the shackle’s lifespan.
- Because it is rust-resistant, it can be used in wet conditions, unlike steel shackles.
- Removal is easy as it never binds or gets stuck even after attaching a heavy load.
- It offers high strength and durability.
- It can handle any kind of delicate workload.
- Its Fiber Lock technology offers superior abrasion resistance.
Applications for HHIppo Link Soft Shackles
- Rigging
- Heavy loads lifting
- Tri-loading
- Sailing and shipping industry
- Lifting delicate loads
- Lifting a variety of loads
- Wet conditions
Primary Functions
HHIppo Link soft shackles are a robust and versatile shackling alternative to traditional shackles. They’re a simple and budget-friendly way of making rigging and lifting applications more secure and convenient.
Shackles are typically measured in lbs/tons, which means they don’t carry a PSI rating. PSI, or pounds per square inch, measures the amount of pressure placed on a square inch of space. It can help users estimate how much pressure or weight a shackle can endure.
At HHI, we have devised a testing method that enables us to test shackles to provide a precise PSI rating. This is incredibly helpful in situations where the application requires a PSI rating rather than the traditional lbs/tons.
Our customers can rest assured that HHIppo Link soft shackles can be safely used in a wide range of rigging and lifting applications.
|
Part Number
|
Size
|
Length
|
Work Load Limit Pounds
|
|---|---|---|---|
|
EHL-316-006
|
3/16”
|
6”
|
2,700
|
|
EHL-014-006
|
1/4”
|
6”
|
4,000
|
|
EHL-516-010
|
5/16”
|
10”
|
5,800
|
|
EHL-038-010
|
3/8”
|
10”
|
8,700
|
|
EHL-716-010
|
7/16”
|
10”
|
9,400
|
|
EHL-012-010
|
1/2”
|
10”
|
12,500
|
|
EHL-916-010
|
9/16”
|
10”
|
15,160
|
|
EHL-058-018
|
5/8”
|
18”
|
20,500
|
|
EHL-034-018
|
3/4”
|
18”
|
27,400
|
|
EHL-078-024
|
7/8”
|
24”
|
37,000
|
|
EHL-001-024
|
1”
|
24”
|
44,000
|
|
EHL-118-024
|
1-1/8”
|
24”
|
58,800
|
|
EHL-114-024
|
1-1/4”
|
24”
|
66,000
|
|
EHL-112-028
|
1-1/2”
|
28”
|
88,400
|