| Wire Rope Diameter (inches) | EIPS Capacities In Tons Angle With Horizontal | Recommended Master Link | Recomm. Shackle Size | Recomm. Eye Hooks | Minimum Sling Length | ||||
|---|---|---|---|---|---|---|---|---|---|
| 60 Deg | 45 Deg | 30 Deg | Dia. | Width. | Length | Inches | |||
| 1/4" | 1.1 | 0.91 | 0.65 | 1/2" | 2.5" | 5" | 3/8" | 3/4 ton | 1'3" |
| 3/8" | 2.5 | 2.0 | 1.4 | 5/8" | 3" | 6" | 1/2" | 1.5 ton | 1'8" |
| 1/2" | 4.4 | 3.6 | 2.5 | 3/4" | 2.75" | 5.5" | 5/8" | 3 ton | 2'0" |
| 5/8" | 6.8 | 5.5 | 3.9 | 1" | 3.5" | 7" | 3/4" | 5 ton | 2'4" |
| 3/4" | 9.7 | 7.9 | 5.6 | 1" | 3.5" | 7" | 7/8" | 7 ton | 2'9" |
| 7/8" | 13 | 11 | 7.6 | 1-1/4" | 4.3" | 8.75" | 1" | 7.5 ton | 3'3" |
| 1" | 17 | 14 | 9.8 | 1-1/2" | 5.25" | 11.5" | 1-1/8" | 10 ton | 3'6" |
| 1-1/8" | 21 | 17 | 12 | 1-1/2" | 5.25" | 11.5" | 1-1/4" | 15 ton | 4'0" |
| 1-1/4" | 26 | 21 | 15 | 1-3/4" | 6" | 12" | 1-3/8" | 15 ton | 4'6" |
| 1-3/8" | 31 | 25 | 18 | 2" | 7" | 14" | 1-1/2" | 20 ton | 5'0" |
| 1-1/2" | 37 | 30 | 21 | 2" | 7" | 14" | 1-3/4" | 22 ton | 5'6" |
| 1-3/4" | 49 | 40 | 28 | 2-1/4" | 8" | 16" | 2" | 30 ton | 6'6" |
| 2" | 63 | 52 | 37 | 2-1/2" | 8" | 16" | 2-1/2" | 37 ton | 8'0" |
| 2-1/4" | 77 | 63 | 44 | 2-3/4" | 9" | 16" | 2-1/2" | — | 8'9" |
Holloway Houston 2 Leg Wire Rope Bridle Slings
For applications requiring stable lifting and even load distribution, 2 Leg wire rope bridle slings provide consistent performance. Also known as double leg wire rope slings or 2 Leg bridle slings, these slings help maintain balance when lifting irregularly shaped or multi-point loads such as machinery, frames, and fabricated components.
What is a 2 Leg Wire Rope Bridle Sling?
A 2 leg wire rope bridle sling consists of two identical lengths of wire rope joined at the top with a single oblong master link or eye. Each leg is equipped with a robust terminal fitting, such as hooks or thimbles, which attach to the load. This design allows for even load distribution between the two legs, making it possible to lift irregularly shaped, offset, or heavy items safely and efficiently.
Key Features
- Two equal wire rope legs, each with secure ends.
- Central master link for easy lifting connection.
- Wide range of hook and fitting options.
- Custom lengths and hardware available.
Design and Materials
Holloway Houston’s 2 leg wire rope bridle slings are meticulously constructed using Extra Improved Plowed Steel (EIPS) with an Independent Wire Rope Core (IWRC), the industry standard for high tensile strength and resistance to crushing. Our bright steel wire ropes are finished with corrosion-resistant lubricant, further extending service life even in demanding environments like marine, industrial, and offshore operations.
Wire Rope Grade & Type
-
Each 2 Leg Wire Rope Bridle Sling is manufactured using materials known for consistent lifting performance.
-
EIPS (Extra Improved Plow Steel) : Provides high tensile strength and resistance to surface wear, supporting repeated use in demanding environments.
-
IWRC (Independent Wire Rope Core) : Adds internal reinforcement to help the wire rope remain stable and reduce bending fatigue under tension.
Configurations
-
Holloway Houston produces 2 Leg Wire Rope Bridle Slings in two standard configurations suited for specific lifting needs.
-
6×19 Wire Rope : Commonly used for sling diameters up to 1", providing strength with balanced flexibility.
-
6×36 Wire Rope : Used for larger diameters, offering greater flexibility and smoother movement during frequent lifting operations.
End Terminations
-
Each sling is fitted with high-quality terminations to maintain strength and protect the wire rope during lifts.
-
Flemish Eye with Steel Thimble : Reinforced splice that prevents wear and maintains eye shape for long-term use.
-
Hook Fittings : Available in eye hooks, swivel hooks, and self-locking hooks, allowing safe and efficient connections with shackles or other rigging components.
Advantages of 2 Leg Wire Rope Bridle Slings
2 Leg wire rope bridle slings are used for lifting loads that need balanced handling and controlled movement. The dual-leg setup helps divide weight evenly and provides steadier control during lifting compared to a single-leg sling.
-
Distributes lifting forces between two points for better balance.
-
Reduces load tipping and shifting during movement.
-
Available with equal or custom leg lengths to match lift points.
-
Helps maintain alignment when lifting wide or uneven items.
-
Commonly used for machinery, frames, and fabricated components.
Compliance and Proof Testing
Each 2 Leg Wire Rope Bridle Sling is manufactured in accordance with ASME B30.9 and OSHA 1910.184 standards. Every sling is proof-tested to 2 times its rated Working Load Limit (WLL) to confirm performance and safety compliance. Each unit includes an identification tag displaying rated capacities, sling angle information, and inspection details. Test certificates and certification records are supplied with every order for complete traceability and documentation.
Selecting the Right Sling
Selecting the proper 2 Leg Wire Rope Bridle Sling requires evaluating load characteristics, rigging geometry, and working conditions. Before each lift, review the following :
- Load weight, dimensions, and center of gravity.
- Number of lifting points and required sling configuration.
- Sling capacity at the planned rigging angle (capacity decreases as the angle from horizontal increases).
- Compatibility of terminations with existing rigging hardware such as hooks, shackles, or master links.
- Environmental exposure including marine, offshore, corrosive, or high-temperature conditions.
- Compliance with ASME B30.9 and OSHA 1910.184 requirements for lifting and inspection.
- The pin or hook diameter should be at least four times the wire rope diameter to maintain rated capacity.
Safety, Inspection, and Maintenance
Regular inspection and proper handling help maintain sling strength and extend service life. Follow ASME B30.9 inspection guidelines before every lift.
Handling Guidelines :
- Inspect before use for broken wires, kinks, corrosion, or tag damage.
- Protect slings from sharp edges using corner protectors or softeners.
- Avoid contact with chemicals, high heat, or abrasive surfaces.
- Maintain sling angles of 30° or greater from horizontal — capacity drops sharply below 30.
- Remove from service any sling showing visible damage as defined by ASME B30.9.
- Store in a dry, clean area, elevated from floor contact and away from moisture.
Personnel involved in lifting operations should be trained in proper sling use and inspection per ASME B30.9 and OSHA 1910.184.
| Diameter (inches) | 30° Cap (tons) | 45° Cap (tons) | 60° Cap (tons) |
|---|---|---|---|
| 1/4 | 0.65 | 0.91 | 1.1 |
| 1/2 | 2.5 | 3.6 | 4.4 |
| 1 | 9.8 | 14 | 17 |
Quality and Compliance
Each Holloway Houston 2 Leg Wire Rope Bridle Sling is built and tested according to ASME B30.9 and OSHA 1910.184 requirements. All assemblies are proof-tested to 2× the Working Load Limit (WLL) and maintain a 5:1 design factor.
- Working Load Limit (WLL) for all configurations
- Unique serial number for traceability.
- Sling specifications and care instructions.
- Optional proof-test certification upon request.
Proof testing certificates are available on request at the time of order. All slings are proof-tested to 2x WLL, with a design factor of 5:1.
Standards Met:
- ASME B30.9
- OSHA 1910.184
Inspection, Tagging, and Compliance :
- Proof testing to twice the working load limit on request.
- Serialized tags and full documentation for traceability.
- Product certification and compliance support for every order.
Holloway Houston wire rope bridle slings are carefully inspected and tagged with permanent metal or vinyl load tags. These tags detail the rated capacities, care instructions, and safety guidelines, helping crews maintain compliance and safety on site.
Technical Features and Customization
Holloway Houston manufactures 2 Leg Wire Rope Bridle Slings with precision and high-grade materials to meet the demands of lifting operations across industrial and offshore sites. Each sling is designed for balanced lifting and consistent performance during multi-point rigging.
Flemish Splicing with Hydraulic Press
Each eye is hand-spliced and secured using swaged steel sleeves under hydraulic pressure to maintain rope strength and structure during lifting.
Wire Rope Treatments
Every sling is internally lubricated during manufacture for smoother rope movement and longer service life. Available in bright or galvanized finish depending on site and environmental needs.
Choice of Hardware
Available with eye hooks (latched or plain), swivel hooks, self-locking hooks, or thimbled-eye terminations that can be used with shackles or lifting hooks based on rigging setup.
Load Tags
Each sling includes a metal or vinyl identification tag displaying rated capacity, sling length, serial number, and wire rope specifications per ASME B30.9.
Custom Solutions and Ordering
Holloway Houston provides custom-built 2 Leg Wire Rope Bridle Slings to match specific lifting requirements. Options include:
Galvanized or stainless steel wire rope for improved corrosion protection.
Custom leg lengths (equal or unequal) and diameter selections.
Choice of end fittings such as hooks, shackles, or thimble eyes.
Complete proof-test and certification packages supplied upon request.
For custom orders, Contact Holloway Houston to discuss application details, load capacities, and fitting preferences. Each assembly is manufactured, proof-tested, and documented to meet ASME B30.9 and OSHA 1910.184 standards.
All 2 Leg wire rope bridle slings are fabricated entirely in-house at Holloway Houston, giving us complete oversight of material selection, assembly, and quality assurance. Each sling is designed for dependable lifting performance across a wide range of applications and environments.
Full In-House Fabrication
Every 2 Leg sling is produced from start to finish in our Houston facility, maintaining precision in rope cutting, fitting, and swaging.
High-Quality Materials
Manufactured using Extra Improved Plow Steel (EIPS) wire rope with Independent Wire Rope Core (IWRC), premium master links, and forged end fittings for consistent load handling.
Rigorous Testing
Each sling is proof-tested to twice the working load limit, visually inspected, and certified to meet ASME B30.9 and OSHA 1910.184 requirements.
Traceability and Certification
Each assembly includes a permanent identification tag and serial number, providing traceability to the material certificates, proof tests, and inspection records.
Applications and Use Cases
2 Leg wire rope bridle slings are important in heavy-duty sectors where balanced load control and multi-point attachment are required.
Marine
Industrial
Mining
Offshore Platforms
Military
Theatrical Rigging
Construction
Outdoor Recreational
Utility
Heavy Lifting
Why Choose Holloway Houston 2 Leg Wire Rope Bridle Slings?
Holloway Houston provides wire rope bridle slings designed for precision, traceability, and compliance with industrial lifting standards. Standard sizes are available, and custom configurations can be built to order.
Precise Fabrication
Built to ASME B30.9 specifications for balanced two-point lifting.
Certified Quality
Proof-tested to 2× WLL with documentation for every sling.
Traceable Identification
Serialized tags linked to certification records.
Custom Options
Available in special finishes, unequal leg lengths, and hardware combinations.
Proven Industry Use
Applied in offshore, manufacturing, energy, and heavy industrial lifting.
Consistent Load Handling
Designed with a 5:1 design factor as per ASME B30.9 standards.