Filter
Turnbuckle Jaw Ends
A turnbuckle assembly is only as strong as its end fittings. Turnbuckle Jaw Ends are the preferred termination for connecting to fixed anchor points, such as pad eyes, lifting lugs, or hoist rings. Unlike an "Eye" end which is permanent, the "Jaw" (Clevis) end features a removable bolt and nut, allowing for easy installation and disconnection without cutting or altering the mating hardware.
Turnbuckle Jaw Ends
Turnbuckle Jaw Ends
Holloway Houston stocks a massive inventory of Crosby HG-4037 Jaw Ends. These are Right-Hand Threaded fittings designed to screw into a standard turnbuckle body. Whether you are replacing a damaged end on an existing rig or fabricating a custom tensioning assembly, we have the certified components to match your load requirements.
Product Spotlight : Crosby HG-4037
The Industry Standard for Turnbuckle Fittings The products in this category are Crosby HG-4037 Jaw Ends. They are forged from high-carbon steel and finished with a hot-dip galvanization for superior corrosion resistance.
- Quenched & Tempered : Like all premium Crosby hardware, these fittings are heat-treated to ensure ductility. In an overload situation, they will deform before breaking, providing a visual warning.
- Fatigue Rated : Engineered to withstand the cyclic loading often found in guying, towing, and suspension applications.
- Secured Connection : Each Jaw End comes complete with a bolt and nut. For critical applications, the bolt is drilled to accept a cotter pin (included), ensuring the nut cannot back off due to vibration.
Understanding Thread Direction
Turnbuckles work by rotating a central body to draw two end fittings together. This requires one end to be Right-Hand (RH) threaded and the other to be Left-Hand (LH) threaded.
- This Category : Contains Right-Hand threads (HG-4037).
- Application : These are typically used as replacements for the RH side of a turnbuckle assembly, or paired with a Left-Hand end and a Turnbuckle Body to build a complete unit.
- Compatibility : These ends fit standard UNC (Unified National Coarse) threaded bodies. Always verify thread pitch and diameter before ordering replacement parts.
Capacity & Sizing
We stock Jaw Ends for every scale of operation, from light utility tensioning to massive structural rigging.
- Thread Diameters : From 1/4" up to 2-3/4".
- Take-Up Lengths : Standard lengths including 6", 12", 18", and 24". Note: The "Take-Up" listed refers to the length of the turnbuckle body these ends are designed to fit.
- Working Load Limits : Ranging from 500 lbs to 75,000 lbs WLL.
Technical Specifications & Compliance
- Standard : Meets the performance requirements of ASME B30.26 (Rigging Hardware) and Federal Specification FF-T-791b, Type 1, Form 1 (Class 7).
- Material : Forged Steel.
- Finish : Hot Dip Galvanized (HDG).
- Markings : Permanently embossed with Size, Trace Code, and Crosby branding.
Browse our inventory below to filter by Thread Diameter, Length, and Working Load Limit.