Made in HoustonTree Saver Straps
Holloway BOA Tree Saver Straps protect tree bark during winching and recovery operations while handling working load limits from 6,200 to 11,000 lbs. The BOA series uses Cordura protection at the eye and, on the BOA-C compact models, along the full body of the strap, extending service life in the abrasive conditions of off-road recovery and forestry work. Available in 3-foot through 20-foot lengths and three compact sizes.
BOA Tree Saver Straps
A tree saver strap wraps around a tree trunk to create an anchor point for winching or vehicle recovery without the strap cutting into the bark. The wider contact area of the strap distributes force across more bark surface than a chain or wire rope would, reducing the risk of damage to the tree used as the anchor.
Holloway Houston builds the BOA line in two configurations: the BOA (with Cordura eye protection) and the BOA-C compact (with Cordura eye and full-body protection). Both carry the same three WLL ratings; 6,200, 9,300, and 11,000 lbs, making the selection is a question of length and protection level.
BOA Models and Sizes
BOA - Eye Cordura Protection
Standard BOA Tree Saver Straps with Cordura protection at the eyes. Available in 3, 6, 8, 10, 12, 16, and 20-foot lengths across all three WLL ratings (6,200 lbs, 9,300 lbs, and 11,000 lbs). 27 total variants.
BOA-C - Full-Body Cordura Protection (Compact)
Three compact BOA-C models with Cordura protection on both the eyes and the full body of the strap. WLL ratings of 6,200, 9,300, and 11,000 lbs. Designed for applications where the strap body is exposed to abrasion during use.
WLL data source: Holloway Houston manufacturer product listings (OEM).
Where BOA Tree Saver Straps Are Used
- Off-Road Vehicle Recovery - Creating tree anchor points for winch recovery without damaging the tree used as the anchor.
- Forestry and Logging - Positioning and moving timber with a tree anchor rigged to a winch line or sling.
- Overland and Expedition Recovery - Pre-positioned in recovery kits for off-road expeditions in rough terrain.
- Emergency Response - Recovery teams using tree anchors for vehicle extractions in flood or storm damage environments.
- Agricultural Operations - Farm and ranch recovery situations where trees are the available anchor points.
Why Holloway Houston for Tree Saver Straps
Holloway Houston manufactures the BOA Tree Saver Strap line in Houston, Texas, under ISO 9001 quality management. Cordura eye and body protection extends strap service life in the demanding conditions of off-road recovery work. With 65 years in the rigging and lifting business, our team understands the difference between a strap made for weekend recreation and one made for working conditions.
Strap Inspection
Tree Saver Straps are load-bearing synthetic straps. Before each use, check for cuts, tears, abrasion damage to the Cordura cover, broken yarns, chemical discoloration, and legible load markings. Straps showing any of these conditions warrant closer inspection and possible retirement per manufacturer guidelines.
Frequently Asked Questions
A tree saver strap is a wide synthetic strap that wraps around a tree
trunk to create an anchor point for winching or vehicle recovery. The wide
strap distributes force across the bark rather than cutting into it.
Holloway Houston's BOA line runs from 3 to 20 feet in length, with WLL
ratings of 6,200, 9,300, and 11,000 lbs. Cordura protection extends
service life at the eyes and body.
The BOA has Cordura protection at the eyes only. The BOA-C compact has
Cordura protection on both the eyes and the full strap body - providing
abrasion resistance along the entire strap when it contacts rough surfaces
during use. Both lines share the same three WLL ratings: 6,200, 9,300, and
11,000 lbs.
BOA standard models are available in 3, 6, 8, 10, 12, 16, and 20-foot
lengths across all three WLL ratings - 27 total variants. The BOA-C
compact line offers three models. Call 1-888-496-4700 for current stock
and bulk pricing.
BOA Tree Saver Straps are rated load-bearing straps with WLL ratings of
6,200, 9,300, and 11,000 lbs. They are designed for tree-anchor
applications in winching and recovery operations. The WLL stamped on the
strap tag should match the recovery loads for a given application - this
is listed on the product tag and manufacturer documentation.
Yes. All BOA and BOA-C variants ship from our Houston, Texas facility.
Call 1-888-496-4700 for bulk pricing and fleet orders.
Related Products from Holloway Houston
-
Holloway Synthetic Winch Lines - 5/8 in. to 7/8 in. diameter, MBL to 92,600 lbs.
-
Holloway Ratchet Straps - 1 in. to 4 in. wide, WLL 1,400 to 6,600 lbs for cargo securement.
-
Holloway Soft Shackles - Synthetic connection hardware for recovery rigs.
DISCLAIMER
Tree Saver Straps are load-bearing lifting and recovery straps. Selection, inspection, and use follow applicable standards and the manufacturer's documentation. The information on this page is for general product awareness and does not replace qualified judgment or site-specific operational procedures.