Made in Houston Made in Houston

Holloway Houston Soft Shackles

Holloway Houston's HHIppo Link Soft Shackles are synthetic shackles designed for applications where a steel shackle's weight, hardness, or corrosive potential are problems. WLL from 4,000 lbs (1/4 inch × 6 inch) to 9,400 lbs (7/16 inch × 10 inch), minimum breaking strength from 20,000 lbs to 47,000 lbs. Available in over ten colors for color-coded rigging setups or personal preference. Four sizes, ships from Houston.

71 items

per page
Filter
Set Descending Direction
Page

71 items

per page
Filter
Set Descending Direction
Page

HHIppo Link Soft Shackles

A soft shackle is a connection device made from high-strength synthetic fiber rather than forged steel. At the same WLL, a soft shackle is significantly lighter than a steel shackle, reducing drop hazards in overhead rigging and minimizing weight in marine and offshore applications. Synthetic materials also eliminate corrosion risks in saltwater and chemical environments.

Holloway Houston manufactures the HHIppo Link line using HMPE fibers, widely used in industrial rigging for their strength-to-weight ratio and flexibility. These shackles do not corrode, spark, or damage contact surfaces and conform to irregular load points. :contentReference[oaicite:0]{index=0}

Available sizes include 1/4 inch × 6 inch, 5/16 inch × 10 inch, 3/8 inch × 10 inch, and 7/16 inch × 10 inch, with WLL ranging from 4,000 lbs to 9,400 lbs.

HHIppo Link Sizes and Ratings

Size WLL MBS
1/4 in. × 6 in. 4,000 lbs 20,000 lbs
5/16 in. × 10 in. - (see tag) - (see tag)
3/8 in. × 10 in. - (see tag) - (see tag)
7/16 in. × 10 in. 9,400 lbs 47,000 lbs

WLL and MBS values vary by size and are listed on product tags and official product pages.

Color options include black, blue, grey, red, yellow, orange, pink, purple, tan, Saturn Yellow, Fusion Red, Army Green, and more.

Where HHIppo Link Soft Shackles Are Used

  • Overhead Rigging - Reduced dropped-object hazard due to lightweight construction.
  • Marine and Offshore - Non-corrosive in saltwater environments.
  • Recovery and Off-Road - Lower recoil energy compared to steel shackles.
  • Color-Coded Rigging - Useful for identification and load management.
  • Industrial Applications - Compatible with synthetic slings and rigging systems.

Why Holloway Houston

Holloway Houston manufactures HHIppo Link Soft Shackles in-house in Houston, Texas, backed by over 65 years of rigging experience. Each product is tested and produced under ISO 9001 quality standards.

With multiple sizes and color options available from stock, HHI supports both single-unit and bulk fleet orders.

Soft Shackle Inspection

Soft shackles should be inspected before each use. Look for cuts, abrasion, heat damage, UV degradation, chemical exposure, deformation, or missing markings. Damaged shackles should be removed from service immediately.

Frequently Asked Questions

A soft shackle is a connection device made from high-strength synthetic fiber such as HMPE. It is lightweight, flexible, corrosion-resistant, and commonly used as an alternative to steel shackles.
Soft shackles reduce weight, eliminate corrosion, and lower recoil risk in case of failure. They are ideal for marine, overhead, and recovery applications.
Sizes range from 1/4 inch to 7/16 inch in the HHIppo Link line, with WLL from 4,000 lbs to 9,400 lbs.
Yes, when used within rated capacity and inspected properly. Their lightweight nature reduces the risk of injury compared to steel hardware.

Related Products from Holloway Houston

DISCLAIMER

Soft shackles are load-bearing connection devices. Selection, inspection, and use must follow manufacturer guidelines and applicable standards. This information is provided for general awareness and does not replace qualified engineering judgment or site-specific procedures.