Shackles

About Crosby Shackles

The Crosby Group traces its roots to 1887 in Tulsa, Oklahoma. Over 135 years of forging and heat-treating rigging hardware has produced a catalog that most riggers treat as the industry baseline, when someone says "shackle," Crosby G-209 is often the implied default.

The G-209/S-209 and G-2130/S-2130 lines covered on this page are forged from Grade 6 carbon steel, with alloy pins (G-209/S-209) or alloy bolts (G-2130/S-2130), quenched and tempered, and proof-tested before leaving the factory. G-series and S-series carry the same WLL at equivalent body sizes — the difference is finish (G is hot-dip galvanized, S is self-colored), not capacity or pin type. Every shackle body carries the WLL, manufacturer logo, and traceability markings per ASME B30.26-2015 (Rigging Hardware).

The RFID traceability program available on select Crosby hardware lets maintenance teams link a shackle's proof test and inspection history to the physical unit, a feature that matters on long-term rigging assemblies and offshore equipment registers.

Holloway Houston stocks the core Crosby shackle lines in Houston with same-day shipping on standard sizes.

Types of Crosby Shackles

Screw Pin Anchor Shackles (G-209 / S-209)

The G-209 and S-209 screw pin anchor shackles are the workhorse of rigging hardware. The bow body accepts multi-leg sling connections, the wide profile distributes force across sling legs without concentrating load on the pin. The screw pin threads in and out by hand, which makes it fast for rigging setups that change frequently. The G-209 and S-209 run from 1/3 ton through 55 tons across 17 sizes.

Bolt Type Anchor Shackles (G-2130 / S-2130)

On any connection with sustained vibration, turnaround work, offshore platforms, permanent rigging, the G-2130 bolt-type is the standard call. The bolt-nut-cotter assembly keeps the pin from backing out where a screw pin won't stay put. The G-2130 and S-2130 cover 1/3 ton through 150 tons, with the 2-1/2" carbon-steel size reaching 55 tons and larger sizes (3"–4") extending to 85–150 tons. Same bow-body profile as the screw pin lines, the difference is in the pin retention, not the body geometry.

Chain Shackles (D-Shackles)

Chain shackles, also called D-shackles or dee shackles, use a narrower, D-shaped bow that's suited to in-line connections on chain and wire rope slings. Where the anchor shackle's wide bow is designed for multi-leg sling eyes, the chain shackle keeps the load centered on the pin for straight-pull applications. Crosby chain shackles are available in both screw pin and bolt-type configurations.

Crosby Shackle Sizes and Working Load Limits

Crosby shackles cover WLL ranges across standard rigging capacity requirements. The G-209 and S-209 screw pin and G-2130 and S-2130 bolt-type lines carry the same WLL at every overlapping size, the pin type does not change capacity.

WLL Range by Series:

• G-209 / S-209 (screw pin): 1/3 ton to 55 tons (3/16" to 2-1/2")
• G-2130 / S-2130 (bolt type): 1/3 ton to 150 tons (3/16" to 4")

Materials:

• G-series: Grade 6 carbon steel body with alloy pins/bolts, quenched and tempered, hot-dip galvanized finish
• S-series: Same Grade 6 carbon steel body as G-series, self-colored (uncoated) finish — same WLL as G-series at equivalent sizes

Marking:

• WLL and manufacturer logo forged into the body per ASME B30.26-2015 (Rigging Hardware)
• Lot number for traceability to proof test certificate
• RFID capability on select catalog models

Why Crosby for Shackles

Crosby shackles carry over 135 years of manufacturing history in Tulsa, Oklahoma. The Global Quality Management System covers raw material sourcing, forging, heat treatment, proof testing, and final inspection - and the lot marking on every shackle ties back to that documentation.

For riggers working offshore, in petrochemical service, or on any job where the rigging hardware needs to perform under documented conditions, the Crosby traceability system means the shackle's history follows the hardware. That matters on equipment registers and third-party inspection programs.

Holloway Houston also offers rigging inspection services. Our qualified inspectors examine shackles, slings, and hardware per ASME B30.26-2015 (Rigging Hardware) and OSHA standards to keep your equipment in service and your crews working.

Shop Crosby Shackles by Type

• Crosby G-209 Screw Pin Anchor Shackles
• Crosby S-209 Screw Pin Anchor Shackles (Self-Colored Finish)
• Crosby G-2130 Bolt Type Anchor Shackles
• Crosby S-2130 Bolt Type Anchor Shackles (Self-Colored Finish)
• Crosby Chain Shackles (D-Shackles)

Crosby Shackle Applications by Industry

• Offshore and Marine - Permanent and semi-permanent rigging connections on platforms, vessels, and mooring systems where bolt-type retention is the standard specification.
• Oil and Gas - Turnaround and maintenance rigging in refineries and petrochemical facilities where lot traceability satisfies third-party inspection requirements.
• Structural Steel Erection - Multi-leg sling connections on beam picks, column erection, and panel lifts where anchor shackle bow geometry distributes sling leg load.
• General Rigging and Crane Work - Day-rate rigging where the G-209 screw pin is the go-to for fast, frequently changed connections on crane hooks and below-the-hook devices.
• Mining and Aggregates - Heavy-duty connections on conveyor maintenance, mill lifts, and underground rigging where the bolt-type G-2130/S-2130 line's extended size range (up to 4" / 150 tons) covers higher-capacity picks the G-209/S-209 line doesn't reach.

Why Holloway Houston for Crosby Shackles

Holloway Houston is an authorized Crosby distributor operating out of Houston, Texas with over 65 years in the rigging and lifting business. We stock Crosby shackles alongside wire rope clips, master links, hooks, and the full Crosby forged hardware line.

In-stock Crosby shackles ship from Houston same day. Our rigging specialists can help match the right shackle type, size, and WLL to your connection requirements. We also offer rigging inspection services, qualified inspectors examine hardware per ASME and OSHA standards.

Complete Your Rigging Assembly

• Crosby Wire Rope Clips - G-413 and S-413 clips for wire rope terminations paired with shackle connections.
• Crosby Master Links - A-347 welded master links for multi-leg sling assemblies above the shackle.
• Crosby Hooks - Hooks for crane blocks and below-the-hook devices that work alongside shackle connections.

Shackle Safety and Awareness

Shackles in load-handling service fall under ASME B30.26-2015 (Rigging Hardware), which covers design factors, marking requirements, and inspection intervals. OSHA 1926.251 addresses rigging hardware on jobsites.

• Shackles are marked with WLL and manufacturer ID. A shackle without legible markings is not suitable for lifting service.
• Pre-use visual inspection covers the body for cracks or deformation, the pin for full seating and thread condition, and the bow for wear beyond the manufacturer's wear limit.
• Screw pin shackles in applications with vibration or load rotation can have the pin back out during service.
• Side-loading a shackle reduces the effective capacity below the in-line WLL.
• A shackle that has been shock-loaded warrants removal from service and inspection before further use.

DISCLAIMER

Shackles are load-bearing rigging hardware. Selection, inspection, and use follow ASME B30.26-2015 (Rigging Hardware), OSHA standards, and the manufacturer's documentation. The information on this page is for general product awareness and does not replace qualified engineering judgment or site-specific operational procedures.